top of page
Oil-Resistant Rubber Belts
Loren Ipsum.
Text
xx
xx
xx
xx
xx
xx
Grade | Standard | Max. Continuous Temp. (Fines / Lumps) | Max. Peak / Intermittent Temp. | Typical Rubber Compounds | Tensile Strength (MPa) | Elongation at Break (%) | Abrasion Loss (mm³) | Recommended Applications |
|---|---|---|---|---|---|---|---|---|
T-Max | DIN 22102 * | 250°C / 300°C | Up to 360°C | EPDM | ≥15 | ≥400 | ≤200 | Incinerators, kilns, red-hot ash, extreme thermal zones
|
T1 | DIN 22102-T1 | 100°C / 125°C | Up to 150°C | SBR | ≥14 | ≥350 | ≤175 | Cement plants, chemical processing, foundries |
T2 | DIN 22102-T2 | 125°C / 150°C | Up to 180°C | SBR | ≥14 | ≥350 | ≤175 | Clinker, coke, pellet, sintered ore |
T3 | DIN 22102-T3 | 150°C / 180°C | Up to 200°C | EPDM | ≥14 | ≥350 | ≤175 | Red-hot sintered materials, furnace ash, high-temp chemical materials |
* UT300 is built to meet all mechanical performance criteria under DIN 22102 (tensile strength, elongation, abrasion) while offering extended thermal resistance beyond the standard’s highest defined heat classes.
bottom of page